This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision | ||
3_stud_gt [2007/12/05 23:48] Ryanmt |
3_stud_gt [2016/08/18 20:27] (current) |
||
---|---|---|---|
Line 1: | Line 1: | ||
===== AX GT Suspension ===== | ===== AX GT Suspension ===== | ||
- | The AX GT used a very similar system to the standard 3 stud setup. The only major difference being the addition of antii-roll bars to the front and rear of the car. | + | The AX GT used a very similar system to the standard 3 stud setup. The only major difference being the addition of anti-roll bars to the front and rear of the car. |
- | The rear anti-roll bar passes through the centre of the crossmember and links the trailing arms. | + | The rear anti-roll bar passes through the center of the cross member and links the trailing arms. |
- | The front anti-roll bar is rubber mounted onto the subframe of the car and both lower suspension arms. | + | |
+ | The front anti-roll bar is rubber mounted onto the sub frame of the car and both lower suspension arms. This setup was changed on the GTI to use drop links, the design on the wishbone also changed to accommodate these changes. |