User Tools

Site Tools


ax_rear_light_cluster_wiring_pin_outs

Nearside cluster

7 pin connector:

Is the feed from the front of the car's loom.

  • 1 - Its the RH Side light feed and it goes though to pin 1 of the 5 pin connector - then goes onto the OS light (see below)
  • 2 - LH Tail light - Also goes though to pin 3 of the 3 pin connector (see below)
  • 3 - Its the Rear Fog light feed and goes though to pin 2 of the 5 pin connector - then goes onto the OS light (see below) -
  • 4 - Brake light (LH) - Also goes though to the pin 3 of the 5 pin connector - then onto the OS cluster's brake light
  • 5 - LH indicator
  • 6 - Its the RH Indicator feed and goes though to pin 5 of the 5 pin connector - then goes onto te OS cluster
  • 7 - Reversing Light

5 pin connector:

Basically this runs to the OS cluster's 5 pin connector. Notice it DOES NOT run Pin 1 to Pin 1!

  • 1 - To pin 5 of the OS cluster - Runs the RH Side light
  • 2 - To pin 4 of the OS cluster - Runs the Rear Fog Light
  • 3 - To pin 3 of the OS cluster - Runs the Brake Lights
  • 4 - To pin 2 of the OS cluster - Earth
  • 5 - To pin 1 of the OS cluster - Runs the RH Indicator

3 pin connector:

  • 1 - Earth
  • 2 - Earth
  • 3 - Run to the Number plate lights - which is powered from the LH sidelights - ie pin 2 of the 7 pin connector.

Offside cluster

The 7 pin and the 3 pin connectors are not used - so DO NOT wire them in!

the only one connected on this side is the 5 Pin connector - its opposite to the 5 pin on the NS cluster.

  • 1 - RH Indicator
  • 2 - Earth
  • 3 - Brake Lights
  • 4 - Rear Fog Light
  • 5 - RH Side light

rear_lights.jpg

ax_rear_light_cluster_wiring_pin_outs.txt · Last modified: 2016/08/18 20:27 (external edit)