User Tools

Site Tools


ax_rear_light_cluster_wiring_pin_outs

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

ax_rear_light_cluster_wiring_pin_outs [2016/08/18 20:27] (current)
Line 1: Line 1:
 +=== Nearside cluster ===
  
 +
 +7 pin connector:
 +
 +Is the feed from the front of the car's loom.
 +
 +  *1 - Its the RH Side light feed and it goes though to pin 1 of the 5 pin connector - then goes onto the OS light (see below)
 +  *2 - LH Tail light - Also goes though to pin 3 of the 3 pin connector (see below)
 +  *3 - Its the Rear Fog light feed and goes though to pin 2 of the 5 pin connector - then goes onto the OS light (see below) -
 +  *4 - Brake light (LH) - Also goes though to the pin 3 of the 5 pin connector - then onto the OS cluster'​s brake light
 +  *5 - LH indicator
 +  *6 - Its the RH Indicator feed and goes though to pin 5 of the 5 pin connector - then goes onto te OS cluster
 +  *7 - Reversing Light
 +
 +5 pin connector:
 +
 +Basically this runs to the OS cluster'​s 5 pin connector.
 +Notice it **DOES NOT** run Pin 1 to Pin 1!
 +
 +  *1 - To pin 5 of the OS cluster - Runs the RH Side light
 +  *2 - To pin 4 of the OS cluster - Runs the Rear Fog Light
 +  *3 - To pin 3 of the OS cluster - Runs the Brake Lights
 +  *4 - To pin 2 of the OS cluster - Earth
 +  *5 - To pin 1 of the OS cluster - Runs the RH Indicator
 +
 +3 pin connector:
 +
 +  *1 - Earth
 +  *2 - Earth
 +  *3 - Run to the Number plate lights - which is powered from the LH sidelights - ie pin 2 of the 7 pin connector.
 +
 +
 +=== Offside cluster ===
 +
 +The 7 pin and the 3 pin connectors are not used - so **DO NOT** wire them in!
 +
 +the only one connected on this side is the 5 Pin connector -
 +its opposite to the 5 pin on the NS cluster.
 +
 +  *1 - RH Indicator
 +  *2 - Earth
 +  *3 - Brake Lights
 +  *4 - Rear Fog Light
 +  *5 - RH Side light
 +
 +{{:​rear_lights.jpg}}
ax_rear_light_cluster_wiring_pin_outs.txt ยท Last modified: 2016/08/18 20:27 (external edit)