User Tools

Site Tools


converting_to_4_stud

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
converting_to_4_stud [2009/10/22 16:21]
Gareth R info on changing top mounts added
converting_to_4_stud [2016/08/18 20:27] (current)
Line 11: Line 11:
 == Note: MK1 Only == == Note: MK1 Only ==
  
-If you have a Mk1 AX these use smaller ball joints and require converting to the later spec wishbones, these can be acquired ​from any later model car. There are two types of later spec wishbones, the type that the ARB (anti roll bar) attaches to the whishbone itself, and the type that the arb is connected to the strut via droplinks.+If you have a Mk1 AX these use smaller ball joints and require converting to the later spec wishbones ​or larger balljoints fitting into the existing wishbones. These can be aquired ​from any later model car. There are two types of later spec wishbones, the type that the ARB (anti roll bar) attaches to the whishbone itself, and the type that the arb is connected to the strut via droplinks.
  
 === AX GTi Struts === === AX GTi Struts ===
converting_to_4_stud.txt ยท Last modified: 2016/08/18 20:27 (external edit)