User Tools

Site Tools


fitting_aftermarket_shock_absorbers_front

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
fitting_aftermarket_shock_absorbers_front [2007/04/13 23:30]
whatsyourbeef
fitting_aftermarket_shock_absorbers_front [2016/08/18 20:27] (current)
Line 6: Line 6:
  
 Using a set of [[tools|spring compressors]] depress the spring, then place the strut in a vice. You will need to hold the damper in position with a [[tools|T40]] socket whilst you undo the top nut with an 18mm ring spanner or open socket. ​ Using a set of [[tools|spring compressors]] depress the spring, then place the strut in a vice. You will need to hold the damper in position with a [[tools|T40]] socket whilst you undo the top nut with an 18mm ring spanner or open socket. ​
 +
 {{http://​i35.photobucket.com/​albums/​d163/​mark_fern/​SP_A1501.jpg}} {{http://​i35.photobucket.com/​albums/​d163/​mark_fern/​SP_A1501.jpg}}
  
Line 11: Line 12:
  
 Remove the rubber bump stop and gaiter. Remove the rubber bump stop and gaiter.
 +
 {{http://​i35.photobucket.com/​albums/​d163/​mark_fern/​SP_A1502.jpg}} {{http://​i35.photobucket.com/​albums/​d163/​mark_fern/​SP_A1502.jpg}}
  
fitting_aftermarket_shock_absorbers_front.txt ยท Last modified: 2016/08/18 20:27 (external edit)