User Tools

Site Tools


head_gasket

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
head_gasket [2007/02/07 21:26]
looney
head_gasket [2016/08/18 20:27] (current)
Line 68: Line 68:
 Refit the upper coolant hose. Refit the upper coolant hose.
  
-Re-fill the engine ​with oil to the required level and re-fill the coolant. ​+Re-fill the [[Oil / fluids guide|engine oil]] to the required level and re-fill the coolant. ​
  
-It will now be necessary to bleed the [[coolant system]].+It will now be necessary to bleed the [[coolant system]]. ​See [[Bleeding the coolant system]]
  
 NB: Ensure you remove any timing tools before attempting to start the engine. The engine may smoke for a short period after replacing the head gasket, due to oil or grease in the head or piston chambers being left in during work carried out. If this continues for a long period of time then there may be a problem with the cylinder head and should be looked at by a specialist or replaced all together. NB: Ensure you remove any timing tools before attempting to start the engine. The engine may smoke for a short period after replacing the head gasket, due to oil or grease in the head or piston chambers being left in during work carried out. If this continues for a long period of time then there may be a problem with the cylinder head and should be looked at by a specialist or replaced all together.
  
  
head_gasket.1170883569.txt.gz ยท Last modified: 2016/08/18 20:27 (external edit)