User Tools

Site Tools


mk1_saxo_clocks_pinout

This is an old revision of the document!


This page is only meant a a guide, it is taken direct from the Haynes Manual but in a more “human” way.

For the switched lives the “Click” on them referes to position on the ignition barrel Under the switched colum, if there is a value (+/-) this is the signal that needs to be applied to get the light to illuminate.

White Connector 10 Pin

Pin Function Switched
1 LH Indicator +
2 RH Indicator +
3 Ground
4 Handbrake On / Low Brake Fluid -
5 ABS Light -
6 Seat Belt -
7 Switched Live (3rd/4th Click)
8 Front Fog Light +
9 Illumination -ve
10 Illumination +ve

Green Connector 9 Pin

Pin Function Switched
1 Oil Pressure -
2 Coolent Light -
3 Light Below Coolant Guage -
4 Coolant Guage
5 Switched Live 3rd/4th Click
6 Rear Fog +
7 Dipped Beam +
8 Main Beam +
9 Glow Plugs (DERV Only) +

Yellow Connector 8 Pin

Pin Function Switched
1 Tacho?
2 Tacho?
3 Contant Live Via Fuse 8
4
5
6 Car Lights? -
7 ECU Light -
8 Air Bag -

Blue Connector 7 Pin

Pin Function Switched
1 Immob Light -
2 Speedo -
3 Low Radiator -
4 Alt Charging -
5 Switched Live (2/3 Click)
6 N/C
7

Brown Connector 6 Pin

Pin Function Switched
1 Switched Live (3/4 Click)
2
3 Fuel Guage
4 Oil Sender
5 Oil Temperature
6 Ground
mk1_saxo_clocks_pinout.1415058154.txt.gz · Last modified: 2016/08/18 20:27 (external edit)