User Tools

Site Tools


spoiler_fitting

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

spoiler_fitting [2016/08/18 20:27] (current)
Line 1: Line 1:
 +====== Spoiler Fitting =====
  
 +The standard spoiler is part of the hinge for the boot and is easy to fit. You need a 10mm spanner or ratchet and somebody to hold the boot. When buying a spoiler make sure it comes with all the brackets.
 +
 +  - Undo the 2 10mm bolts holding the boot lid on
 +  - Prod out the two nuts that are on the outside of the boot lid if they'​ve not fallen off already
 +  - Fit the spoiler and re-attach the two 10mm nuts. This is the most important bit, make SURE you don't over tighten the nuts, if you do you will smash the boot lid. Its probably a good idea to use a spanner as its easier to get carried away with a ratchet. ​
 +
 +If you've not got the seals put a bit of silicon round the hole to make it water tight.
spoiler_fitting.txt ยท Last modified: 2016/08/18 20:27 (external edit)